Summary
Bathrooms are places where we clean our bodies and maintain our hygiene. But for many, keeping the bathroom germ-free is like a never-ending war. It takes a lot of effort and time. The purpose of writing this article is to teach you how to remove Mold from bathroom. This small article will make your life super easy and comfortable.
Introduction
Mold in the bathroom can be a nightmare for many. It can cause a foul odour and lead to the growth of germs and diseases. Especially in the case of kids, you have to be super cautious.
Mold spores can cause lung irritation. They can block airways, leading to coughing, wheezing, and even breathing problems. They can also trigger allergic reactions, leading to sneezing, running nose, itchy eyes, and skin irritation.
In extreme cases, it can result in mental health problems such as depression and anxiety. Data also suggests that constant exposure to Molds in the bathroom results in fatigue in the body. Also, a steady accumulation of Molds in the respiratory channel can cause congestion and facial pain.
Apart from physical and mental health damage, mold can also cause financial damage. Constant accumulation of mold can result in leakages in the walls and floor of the bathroom. It can even reduce the value of your property. Getting rid of such leakages is a hard nut to crack.
Now, you might be wondering how to remove Mold from bathroom. Don’t worry; I have explained everything you need to know to keep your bathroom intact.
| Also Check: Bathroom Fittings and Accessories for Every Style
How to Remove Mold from bathroom
Molds or moulds are dust-like fungi. Bathrooms provide the perfect environment and temperature for mold breeding. Though getting rid of mold can be a problem, it can be done quickly if you follow a few simple steps.
Molds prefer an acidic environment for fast growth. Treating them with an alkaline solution makes them straightforward to remove.
- Vinegar: Prepare a solution of vinegar and water in a ratio of 1:5. Mix 1 cup of vinegar and 5 cups of normal water. This solution has a success rate of 82% in eradicating mold. It is a natural ingredient that doesn’t produce any toxic gas during mold eradication.
- Baking Soda: Baking soda is another chemical readily available in every kitchen. It is also alkaline. To use it, spray the baking soda solution overnight, allow it to react, and scrub with a brush in the morning.
- Borax: Borax powder is readily available in medical stores. Mix borax and water in a ratio of 1:10. Apply the solution to the Molds and scrub with a stiff brush. After washing, clean the surface with water. After cleaning, spray the remaining solution over the affected area and leave it overnight. It will stop the further growth of Molds.
- Bleach: Though bleach can remove mold, it is not the best option. Applying it can produce harmful, pungent-smelling fumes. That’s why you can use bleach only in a well-ventilated bathroom. One more word of caution: Never mix bleach with ammonia.
- Commercial Mold Remover: Go to a hardware store and purchase a remover. But before buying any solution, read the instructions properly. Also, check if it is safe for kids.
- Large Mold Infestations: If there is a significant accumulation of Mold greater than 3 feet or if you find Mold in the HVAC system, go and get an expert. It is an indication that the problem is severe and needs attention. Experts are equipped with instruments and well-trained in handling such situations.
| Quick Read: Chrome Vs Stainless Steel Faucet – 10 Things To Know
5 Ways to Prevent Mold Growth
A well-known saying is, “Prevention is better than cure.” Though you are willing to know how to remove mold from bathroom, you should also learn how to stop mold from growing. Here are some ways to prevent mold from growing.
1. Control Moisture
Molds need a moist environment to breed. The bathroom is the best place in your house where such conditions develop easily. Here is a trick for keeping the bathroom clean.
- Fix leaks promptly. Leaks can occur in faucets, pipes, and roofs. They prevent the floor from drying and allow moisture to build up.
- Improve ventilation: Improved ventilation is a natural way to control moisture. Install the door and window on opposite sides. See that the unrestricted airflow through the window is not blocked from outside.
- Reduce humidity: Use a dehumidifier to keep the moisture in the bathroom under 60%. It is an electronic gadget with a cooling coil. The damp air passes through it and condenses.
2. Increase Air Circulation
Better air circulation will not allow the moisture to accumulate and keep the humidity under control. The goal of improved air circulation can be achieved by:
- Open doors and windows: Keep the windows and doors open when not in use. It’s also a good practice to leave a small gap at the bottom of the door. This will allow air to flow in and out of the bathroom and provide a natural solution to keeping it dry.
- Run exhaust fan: After using the bathroom, run the fan for 20 mins. This will suck out the air with moisture out of the bathroom.
3. Address condensation
The air inside the bathroom is full of moisture. When such air comes in contact with cold surfaces, it condenses and wets them. These solutions can prevent the moist air from condensing.
- Insulate cold pipes: When air comes in contact with freezing pipes, condensation becomes vibrant. To avoid such contacts, try to insulate such pipes.
- Increase room temperature: If you can maintain a temperature slightly higher than room temperature, Molds will find it challenging to grow. At the same time, it will reduce the need for hot water while bathing.
| Quick Read: Toilet Buying Guide: 10 Thing To Look For Before Buying
4. Inspect prone areas
- Bathroom: Clean the bathroom regularly. Pay special attention to areas near showers, bathtubs, toilets, and sinks where mold is more likely to grow.
- Attics: Check for leakage near the roof and inspect the ventilation for blockage.
5. Use Mold resistant material
- Mold-resistant drywall: Go for Mold-resistant drywall while constructing the bathroom. It will prevent many future problems.
- Non-porous substances: Use materials like marble or tiles on countertops, showers, walls, and floors. Such a surface is easy to clean and restricts the growth of Mold.
Where to purchase Bathroom fittings
Bathroom fittings should be sturdy and long-lasting. Every day, the walls and floors of the bathroom and the fittings inside experience many streams of water and chemicals from soap and shampoo. If you are not vigilant about the quality of the products you use, you may face many problems in the future.
If you need a counter where you can trust the quality, East India Company is the only solution. They sell bathroom and kitchen wares, have multiple showrooms in Chennai, and have been trusted by consumers for over three decades.
East India Company is another name used for credibility. It is the perfect place to find everything to beautify your bathroom and kitchen. Everything required can be found under one roof, from sinks to shower enclosures, pipes to drain covers.
|Also Check: Types Of Water Closets That You Should Look To Elevate Your Space
Conclusion
It is not easy to construct a house when inflation peaks. After all the expenses you incurred, it’s time to relax and enjoy the peaceful environment of your home. However, the bathroom is the most vulnerable place in your house to wear and tear.
It is where we clean ourselves, and it is equally important to keep it clean and dry. This guide on how to remove mold from bathroom can help avoid many future problems and keep you and your family safe and secure.
Checkout Our Best Selling Categories
For Latest Updates and Trends Checkout Official East India Company Instagram Page |
FAQs Related To How To Remove Mold From Bathroom
1. How long does it take to remove Mold from the bathroom?
The entire Mould removal process can take from 1 day to 5 days. Use antifungal and antimicrobial treatments to speed up the overall process. You must be physically involved, scrubbing the affected areas to remove the Mold completely.
2. How harmful is bathroom Mold?
Mold can produce toxic chemicals inside the bathroom. These toxins can result in many physical and mental problems. To avoid such issues, remove the mould as soon as possible.
3. Is it safe to remove Mold from the shower?
During Mold removal, wear a mask and gloves. Applying chemicals to the molds will release pungent-smelling fumes, which can be irritating to the eyes and skin.
4. Can Mold be removed entirely?
If there are pores in the bathroom floor, ceiling, or walls, mold is prone to growing again and again. Before you obliterate Mold, first treat these pores or tiny holes.
5. Can bathroom Mold cause skin problems?
Molds produce toxic chemicals that can cause skin allergies. Other than skin, it can also cause problems like anxiety or depression. Fatigue is a common problem because of mold.